Do you know how to use Dewalt Compound miter saw? Usage of the Dewalt miter saw correctly is not so tough. Using a Dewalt miter saw may be easier if you mount it on the DeWALT universal table. It is made of aluminum, so it is very robust. The table is compatible with all miter saws.

It is as simple as other brands available in the market. The basics are the same with some additional features. The Dewalt miter saw is one of the most accurate miter saw on the market. So, you need to know how to use the Dewalt compound miter saw correctly Before using it. Today you will be going to learn about how to use Dewalt Compound Miter Saw correctly.

Safety Tips for Using Dewalt Miter Saw:

Keep your palms 6–12 inches (15–30 cm) away from the saw blade when the saw is plugged in. Never reach under the blade when you are operating the saw. Always wear the correct safety gear when operating a power saw. Wear protective eyewear in case you’re cutting wood to avoid blowing sawdust to your eyes. If you’re cutting alloy, wear a welding mask, rubber apron, and rubber gloves to protect yourself. Wear protective headphones to prevent hearing loss as you’re operating the saw.

  1. First of all, you need to plug in the DeWalt miter saw. And unlock it. For unlocking your DeWalt miter saw find the metal pin. The lock pin is for unlocking the head of the saw so that you can up and down the blade. Together with your hands firmly on the handle, press down the saw a little and hold it in position. You Can’t unlock the saw without even maintaining the blade down
  2. Start the blade and pull the saw toward you until the module is directly above the board’s edge that is closest to you.
  3. The fence allows you to rest the rear of your board against it. It retains the wood stable and aids your miter saw cut right to the level setting you’ve selected.
  4. Squeeze the trigger to initiate the saw and wait patiently for it to attain peak rotation speed. Then pull down the blade and into the wood.
  5. While the blade is still rotating, then push the saw back and away from you since your blade cuts through the remainder of the wood (see photo below.)
  6. When the blade has finished cutting the timber, increase the saw and release the trigger to stop the saw.
  7. Do not forget to go through this line-up and Remember your angle. If you do not follow these, you cannot get the proper output from this machine. And from a little mistake, your wood comes up into Short bits or you could find a critical injury.
  8. Try To follow the company’s operating maintenance manual and security instructions. In conclusion, your work just put off your machine.

Important Point Ideas About The Usages of DeWalt Miter Saw:

Before going to its usage, we are going to give you some unique point ideas about Dewalt:

  • This miter saw is particularly suitable for laying floors, cutting moldings, quarter-rounds, backsplashes, bases, picture rails, molding doors, and windows, or even for cutting.
  • The cut depth limiter allows you to adjust the depth of the grooves. The bias adjustment mechanism helps to choose the parameters for a task. Also, it will be done in a very efficient way. The angle adjustment mechanism of the Dewalt miter saw guarantees the change of parameters between 0-60º on the left and 0-50º on the right. It is good to say that the mechanism of the angle change is located in a way that facilitates this activity.
  • Safety and comfort of use of the miter saw Predicted that the use of the tool will be efficient and comfortable. This is why the miter saw makes it possible to adjust the standard cutting angles using the blocking cuts on the scale. While the blocking ensures a stable working angle and the rolling guides ensure easy pushing. It should be added that the user of the miter saw can list all the graduations if they are wiped off. The exchange is not complicated.

Power tools are hazardous if you don’t know and understand how to use the Dewalt miter saw correctly. So be careful. Before beginning learning, the procedure for utilizing miter saw you want to install this machine properly into your workstation.

This miter saw can cut a miter or any angle to cut a miter plank like a broad 90 or 45-degree angle. It has a single bevel for a single direction and a compound bevel direction. For its sliding bevel, it could go up to dual management from its actual width. So let’s start learning how to use a Dewalt sliding compound miter saw.

Watch More on this Video:

To lock the saw, then press down the handle until the blade is as low as it can go. Then, press the lock pin back in the rail to secure the blade in place. Ensure that the saw is secured by yanking on the deal using all the snare pushed. If the handle doesn’t move, your saw is locked. Always unplug the saw when you’re changing the blades if you accidentally turn it on.

Be careful not to forget to put on glasses to avoid projections, and why not a noise-canceling helmet if your miter saw makes too much noise. You can never be careful enough. Now you know how to adjust the Dewalt miter saw correctly. So Now You Can easily make gorgeous DIY Frames, and geometric Art bits. You might also set up baseboards and thousands of other things. So today You are almost familiar with all the sections of this machine. So let’s start using it. It is a fantastic tool.