Handling a saw is not an easy job. The hardest part of using a hand saw is; you can not control the falling speed of the branch, which has been cut from the tree. It can hurt you as well as other plants and animals beneath. So, to avoid such phenomena, saw production companies produce saws with ropes. Our article is all about how to use a pole saw with rope.

In this article, you will find the easiest way to run a saw with rope. The rope is very much helpful to control the speed of falling branches or wood on the ground.

What is a pole saw?

A saw will be attached at the head of a pole in a pole saw. You will find two sorts of pole saws in the market. One works in the manual version. Besides, the other comes with a small blade that is regulated by a trigger.

In the manual version of a pole saw, a long pole will be stretched to approximately 10-20 feet. It uses a small chainsaw cutter along with a moderate slope that can be set for multiple angles. You have to use a trigger mechanism to set the speed of the blade.

Now, we are going to guide you on how to use a pole saw with a rope. Read on the steps-

How to Use a Pole Saw with Rope:

Step 1: Clean the Area

Clear a work area by removing lower limbs and branches. If you cut the branches part by part, this process will reduce the harm due to the weight of long tree branches. You can use a ladder to fasten the tree branches. Keep the trip hazards such as a garden hose, garden tools, chains, and electricity lines out of the area.

Step 2: Planning

After cleaning, plan your preferred pruning branch. It helps to shape your tree well. Start trimming from the horizontal surfaces of the branch.

Step 3: Positioning

Remember, you should not stand under the limbs. Go to a point where you can grab your pole saw at chest height. If your pole is extendable, adjust it to your requisite height. Then, hold the handle of the pole saw towards the branch.

Step 4: Start to cut branches

Are you ready to start cutting? Let’s go through the final cutting step-

  • Slowly, begin the first straight cut of the branch.
  • You should ensure a flat cut to make a notch. This process will help to enhance your speed.
  • Check the broken branch. If it falls off to the ground, the pole saw may slips aside. Immediately stop the cutting.
  • Relocate the saw and do the step again.

Step 5: Cleanup Your Workplace Once More

When limbs fall to the ground, please try to clean everything fast. It is also essential to action initial trims for larger stems. Remove the fallen branch from your area to avoid tripping over it.

Watch More on this Video:

What types of maintenance should I do on my pole saw?

  • Regular maintenance is essential to ensure the safe and effective performance of your pole saw. Here are some tips for caring for your tool:
  • Keep the blade sharp by occasionally using a file or grinding stone to sharpen it.
  • Check the rope regularly for any signs of wear and tear, and replace it if necessary.
  • Make sure all moving parts are properly lubricated with oil in order to prevent rusting or corrosion.
  • Clean the blade after each use to remove any dirt or debris that may have accumulated.
  • Inspect all screws, bolts, and washers on a regular basis to make sure they are secure and not in need of replacement.
  • Store the pole saw in a cool, dry place when not in use and away from any flammable materials.

 

Pole Saw Safety Tips:

Know Your Equipment: It is important to familiarize yourself with the equipment you’re using. Know how to properly use the pole saw and understand what safety measures are needed when operating it. Make sure that your pole saw is in good condition before using it, as a malfunctioning tool can be dangerous.

Wear Protective Gear:

When working with a pole saw, always wear protective gear such as eye protection, gloves, long pants, and closed-toe shoes. Also, make sure to wear a hard hat if there is any risk of falling debris or branches from where you are cutting.

Clear the Area:

Before beginning your work, assess the area for potential hazards like power lines, nearby people and animals, and objects that could be struck by the pole saw. Remove any potential hazards before beginning to work.

Secure Your Ladder:

If you are using a ladder to reach higher branches, always make sure it is securely positioned on even ground and that no one else is near it while you’re working.

Avoid Overreaching:

Keep your body as close as possible to the tree or shrub when cutting with the pole saw, and never overreach your arms or legs.

Use Proper Technique:

When using a pole saw, keep two hands firmly on the handle at all times and use slow controlled strokes for accurate results. Never put too much pressure on the tool—it will only increase the risk of an accident.

Maintain Your Tools:

To ensure your safety, it is important to regularly maintain and inspect your pole saw for any signs of wear or damage. If any parts are worn or broken, replace them immediately. Also randomly oil the chain to operate the pole saw smoothly.

Follow these guidelines when using a pole saw and always practice safe working habits—it could save you from serious injury or worse.

Final Thoughts:

As you know, the procedure of using a pole saw with a rope, you can buy one without making any mistakes. Moreover, you have to be careful all the time while using the saw. Using a saw with a rope can make the cutting process more efficient and smooth. Also, it creates safety around the site of work too.

I hope you will be satisfied with the information about how to use a manual pole saw with rope. If you need any assistance regarding the issue, contact us. We are always here to help you. And we will be glad to be a part of your work. Best of luck!